TS Pad Printing Drying Cabinets

Brand

After washing out the polymer plates, we recommend post-exposure with subsequent drying/curing. The TS pad printing drying cabinets give optimum curing and thus achieve a maximum service life for polymer plates. The units reach a maximum temperature of 60 °C. A timer is available for setting the drying time. After the set time has elapsed, the heat supply switches off automatically.

The units are availabe in three different sizes. Exposure units and drying cabinets in sizes 25/30 and 35/50 have UV-LED tube lamps, size 35/100 has UV-tubes. State-of-theart lighting technology enables a time- and energy-saving exposure time of a few seconds. Exposure time set via timer.

EXPOSURE UNIT TECHNICAL DATATS Pad Printing Drying Cabinets

You may be interested in

Orabond 3331TG Main

Orabond 3331TG Industrial Tape

ORABOND 3331TG Industrial Tape forms part of our AM2 range of high performance double coated tapes. It consists of a hard PVC film carrier, coated on both sides with a modified solvent acrylate adhesive. It has a very good resistance against UV radiation, extreme temperatures, chemicals, solvents and humidity.

VIEW PRODUCT »
Screen Printing Adhesive Powder Main

Screen Printing Adhesive Powder

Applied to print after final color. When cured, powder will melt into the ink. Transfer applied with heat press. Powder re-activated and provides an enhanced bond onto the shirt, thus giving it much better wash-ability.

VIEW PRODUCT »
Car Wrap Vinyl Holder Applicator Wrap-u-ezee Wide 05

Car Wrap Vinyl Holder Applicator

Simplifies the vinyl wrapping of protruding vehicle parts. Attach the vinyl film to the Wrap-U-ezee, preheat it and pull it over the part in a single motion. Film evenly pre-stretched, risk of overstretching in critical areas significantly reduced.

VIEW PRODUCT »

Search